The LB60Z-1 is a Z-Wave controllable and fully-dimmable, instant-on LED screw-in light bulb that provides pleasant soft-white illumination equivalent to a 60-watt incandescent bulb, yet uses only 9 watts of energy. The LB60Z offers great value and convenience with an estimated 22+ year lifespan (3 hrs./day avg.), and remote control through a compatible Z-Wave hub or controller.

• Wirelessly control the bulb from anywhere (requires Z-Wave Apps for iOS or Android)
• Turn the bulb ON, OFF, or use its dimming features to adjust to 100 levels of brightness
• Acts as a wireless repeater to extend the Z-Wave mesh network to cover longer distances
• Integrates with other Z-Wave certified products from Nortek Security & Control

mart LED Recessed Retrofit Lighting Kit (LB65R6Z-1) fits into 5″ or 6″ recessed ‘can’ lighting fixtures, replacing old, outdated incandescent screw-in bulbs with clean and attractive, soft-white efficient LED lighting.

The LB65R6Z can be controlled wirelessly (On/Off/Dim) when used in conjunction with a Z-Wave controller/hub using the controller’s user interface (e.g. 2GIG GC2), or via a smart phone, tablet app, or PC.

Depending on the capability of your controller/hub, once the Smart Retrofit Light has been added to your network, it can be added to a ‘Group’ or ‘Scene’ or change its status via your controller / app’s specific programming.

• Built-in Z-Wave: Can be controlled remotely and wirelessly

• Plug and play, simple setup

• Ultra-long life and more energy-efficient vs. incandescent or fluorescent lights

• Instant-on lighting

• Over-the-Air firmware upgrade available (with compatible gateway, Z-Wave static controller, or PC and software)

• Uses new, advanced feature 500-Series Z-Wave module

• Manual reset capability

• Input power: 120 VAC, 60 Hz.

• Brightness: 650 lumens

• Wireless Range: Up to 130 feet line of sight between the controller and other nodes

• For indoor use only

The Bulbz indoor flood light (Model LBR30Z-1) is a Z-Wave light bulb that has the characteristics consumers want in a flood light form factor, with the added capability of remote and automation-system control. It’s a great solution for consumers who want to have ’scene’ or remote control capability on their recessed ’can’ lights or track lighting fixtures, without having to mess with any electrical wiring – it’s as simple as screwing in a bulb!

By simply removing the regular flood light bulb they now have, and screwing in this Z-Wave LED dimmable indoor flood light bulb into their fixtures, they get the tremendous benefits of being able to control their lighting using their smart phones or tablets through their hub/controller’s Z-Wave app, and creating automation ‘scene’ control for setting the right mood, or making this light turn on or off when other Z-Wave devices are activated. This light is also controllable using the 2GIG (or other) security & automation systems, and via its remote app interface.

• Uses only 7.5 watts of energy and provides as much light as a traditional 65-watt incandescent flood light bulb (650 lumens)

• Medium-cool 5,000K light appearance (pleasant and cool, providing near-daylight illumination)

• Perfect for recessed ‘can’ (4″ or larger) and track light fixtures that use flood lights; for kitchens, bathrooms, family & living rooms, foyers, offices – you name it

• Annual energy consumption (@ 3 hrs./day, 11¢/kWh) is only $0.90!

• Includes wall light switch ‘clip’ that will keep the light switch in the ‘on’ position to ensure that the Z-Wave circuitry inside the flood light bulb is always active

• Dimensions: 3.75″ diameter by 5.375″ high

The PD300Z-2 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times).

This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp’s manual switch off, then on, and AutoSense will instruct the PD300Z-2 to turn the lamp on.

• Signal (Frequency): 908.42 MHz

• Maximum Load:
Incandescent: 300W maximum, 120 VAC

• Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device

• Network wide inclusion

• One controlled and one pass-through outlet

• Security beaming

The PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15Z-2 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times).

This plug-in Appliance Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

• Signal (Frequency): 908.42 MHz

• Maximum Load:
Resistive: 15 amps (1800 watts) maximum, 120 VAC
Motor: 1/2 H.P. maximum, 120 VAC
Incandescent: 600W maximum, 120 VAC

• Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device

• Network wide inclusion

• One controlled and one pass-through outlet

• Security beaming

The WT00Z-1 Wall Mount Accessory Dimmer Switch allows remote ON/OFF control and dimming of lights controlled by associated Z-Wave modules, creating virtual 3-way switches. The WT00Z-1 controls no load directly, so it can be wired anywhere power is available, without the need for a traveler wire.

Replaceable Trim Ring

The WT00Z-1 3-Way Wall Mount Accessory Dimmer/Switch has a field replaceable trim ring – the color of the device can be altered with the Trim Ring Kit model in black, brown and almond.

• Signal (Frequency): 908.42 MHz

• Load: does not directly control a load. Another Z-Wave device is required

• Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device

• Network wide inclusion

• Connect up to 5 devices to create virtual 3,4,5,6,7-way operation

• Requires Minimote

• Security beaming

The FS20Z-1 Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical box to operate loads or control relay-based devices. The relay can be isolated for dry contact applications or powered to switch live loads. This device can operate loads of up to 277v.

Possible Applications : Commercial Lighting, In-Ceiling Lighting/fans, Dry-Contact Relays, Pool Pumps, Water Heaters.

The Contact Fixture integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

• Maximum Load:
Isolated Contacts: 20 amps G.P. maximum, 277 VAC, 10FLA, 60LRA, 250VAC
Motor: 1 H.P. maximum, 120/240 VAC
Incandescent: TV8 (Tungsten), 120 VAC, 960W maximum

• Signal (Frequency): 908.42 MHz

• J-Box mounted

• Dry or wet contact applications

• Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device

• Input: 120 VAC, 50/60 Hz

• Z-Wave Version 4.55

• Network wide inclusion

• Scene: Command Class

• Security beaming

• Isolated Relay Output up to 277v

The WO15Z-1 Single Wall Outlet is wired in place of a standard duplex receptacle. This device allows remote ON/OFF control of loads connected to the bottom outlet (the other outlet remains powered at all times).

This WO15Z-1 Outlet integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

2008 National Electric Code Compliance
The 2008 NEC requires that all new installations of single and multi-family homes install tamper-resistant outlets. The WO15Z-1 is fully compliant with this code.

• Maximum Load:
Incandescent: 600W maximum, 120 VAC
Resistive: 15 amps (1800 watts) maximum, 120 VAC
Motor: 1/2 H.P. maximum, 120 VAC

• Signal (Frequency): 908.42 MHz

• Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device

• Input: 120v 15A 60Hz

• Tamper resistant as required by 2008 National Electric Code for new and renovated dwellings

• Network wide inclusion

• Scene: Command Class

• Security beaming

• Requires a Neutral

The GD00Z-4 Garage Door Opener Remote Controller opens or closes a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel. It is compatible with virtually any automatic garage door opener connected to a sectional garage door. Installers only need to ‘pair’ the unit into the Gateway, mount the unit, connect two wires and plug it in. The GD00Z provides both audible and visual warnings prior to remotely-activated door movement, allowing it to meet UL 325-2010 safety requirements. The GD00Z ships with a wireless tilt sensor that attaches to the inside of the garage door, which reports ‘open’ or ‘closed’ status to the controller.

SPECIFICATIONS

• • Power: 120VAC, 50/60 Hz
• • Garage door position sensor frequency: 345 MHz
• • Z-Wave Frequency: 908.42 MHz

MODULE SPECIFICATIONS

• • Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave receiver module
• • Network wide inclusion
• • Scene: Command class
• • Security compatible

• FCC

• ETL

• UL 325

• Power supply 120VAC / 60Hz to 12VDC

• Garage door tilt sensor

• Mounting bracket and hardware

• Controller – W x H x D (Inches): 6.94 x 1.38 x 5.0

• Tilt sensor – W x H x D (Inches): 1.69 x 0.88 x 1.19

NOTE: Works with all major garage openers.

Including:

Chamberlain MyQ Models: WD962KEV, KPEV & MLEV WD832KEV HD 930EV & 420EV LW500EV PD752D & KPV
Genie Series III Models: PowerMax 1500 TriloG 1200 & 1500 IntelliG 1000 & 1200 LiftMaster MyQ Models: 8355, 8360, 8500, 8550, 8557 & 8587
Craftsman AssureLink / MyQ Models: 3043 & 30437

The Model WA00Z-1 is a Smart Switch Cover with Z-Wave radio.

• Built-in Z-Wave radio – can control Z-Wave Light Bulb and switches/dimmers remotely and wirelessly

• Plug and play, simple setup. Fits over an existing wall switch

• Manually turn on, off, dim your lights while keeping the smart light bulb always online in your home network

• Works with different types and brands of Z-Wave LED Light control devices

• Powered by Z-Wave® 500 Series module inside

• Manual reset capability

• Powered by 2 pieces of standard CR2032 Lithium Coin Cell with long battery life

2008 National Electric Code Compliance
The 2008 NEC requires that all new installations of single and multi-family homes install tamper-resistant outlets. The WO15Z-1 is fully compliant with this code.

A state-of-the-art video doorbell with weather-proof and hardwired design! See or speak with anyone at your door securely… right from your smartphone app! Anywhere. Anytime. Even at night! The Smart Doorbell Camera comes with a smartphone app, available for multiple users and devices. See live video of who is at your door, and have a two-way conversation with your visitor or the delivery person even if you are not home.

Our Doorbell Camera is designed to last the life of your system. It is sealed and hard-wired, which makes it highly durable and low maintenance, an advantage that most other doorbell cameras cannot claim. Easy sale for professional installers!

With advanced motion detection, the GoControl Smart Doorbell Camera can alert you to the presence of visitors before they even ring the doorbell. Improve your home security by knowing who is at, or has been at your door. You can also see who is at your door, in near total darkness with our advanced Night Vision mode.

• See who is at the door with free “My Doorbell” (iOS/Android) app

• Multiple users and devices can receive alerts

• Two-way conversation from smartphone

• Record snapshots and video to phone

• Motion detection notification

• Multitude of faceplates colors

• Night vision, see in near total darkness

• Activity log of events/alerts

• No monthly fees

• Hardwired installation

A battery powered Z-wave thermostat that connects to all Z-Wave hubs, including the 2GIG GC2 panel giving you control over your home’s comfort wherever you are. This model is designed to be incredibly easy to install and includes a front loading battery compartment to hold 4 “AA” batteries to power the thermostat for two full years, or it can be powered by the HVAC systems 24 VAC “C” wire. The 7 character scrolling display makes programming simple.

• Battery powered design runs on 4 “AA” batteries

• Extremely long 2 year battery life

• Can be powered by 24 VAC “C” wire from HVAC system

• Z-Wave compatible – Ver. 4.5.5

• Supports Z-Wave FLiRS functionality

• Works on standard HVAC systems: 2 stage heat/ 2 stage cool

• Works on heat pump HVAC systems: 3 stage heat/ 2 stage cool

• Incredibly easy to install and program

• USB firmware upgrade ability

• Wall mount or mounts on single-gang junction box

A simple-to-use Z-Wave controller that plugs into your PC computer’s USB port, allowing home automation control of Z-Wave devices using its free smartphone app. The QuickStick devices comes with free PC-based software and a free downloadable app, allowing you to control Z-Wave products from Nortek Security & Control and others. Remote Z-Wave control requires that the associated PC remains powered, turned on and connected to the internet. (If the connected PC reverts to sleep or hibernate mode, Z-Wave remote control capabilities will not function).

This Glass Break Sensor (GB00Z-2) offers superior monitoring of glass windows or doors and alerts the homeowner when a break has been detected. Unlike other ‘shock’ – type detectors, which can only be affixed to one single pane of glass, the Glass Break Sensor can be easily mounted on the wall or ceiling and monitor multiple windows or glass doors within a 12-foot radius of the sensor. Advanced two-stage “thump & crash” detection technology uses acoustic monitoring and analysis to significantly reduce false alarms. The Glass Break Sensor effortlessly integrates with any Z-Wave hub, app, and other devices to alert homeowners when a glass break event has occurred.

• Always ready detection

• Spatial detection of window shattering sounds

• Long-life battery included

• Z-wave communications test button

The WAPIRZ-1 Wireless Z-Wave passive infrared motion detector (PIR) is a wireless indoor security device designed to sense and report motion activity and transmit alert signals via a Z-Wave network. the PIR comes with a long-life battery, and provides a low-battery alert signal when the battety needs replacement. The PIR also includes a temperature sensor that can trigger an alert based on specific changes to the room’s temperature.

• Motion detection range: 6’ to 32’

• 120° detection angle

• Heat rise temp alert: 2° F

• LED activity indicator

• 100’ line-of sight range

• For non-life safety applications

• Anti-tamper design

• Up to 5 Associations

The WADWAZ-1 wireless Z-Wave door or window sensor is a two-piece sensor designed to be affixed to a door, window, or other permanent fixture that opens and closes, such as a drawer, safe, or valuables storage cabinet. Once paired with a compatible Z-Wave controller or hub, the sensor will report when the fixture has been opened or closed via wireless Z-Wave transmission.

• Maximum sensor gap: 0.75″

• Internal reed switch

• External switch support

• For non-life safety applications

• 100’ line-of-sight range

• Anti-tamper design

• Up to 5 associations

The Smart Water Leak Sensor is great for multiple locations in your home – set one by your toilets, water heater, under sinks, and even near water-using appliances like washing machines and dishwashers.

• Install sensor on the floor near potential leak sources

• 10+ year battery life (battery included)

• Get notifications straight to your monitoring station and smart phone

The WA105DBZ-1 wireless Z-Wave enabled combination sounder/strobe warning device, designed to alert intruders of a security system presence. Once paired with a compatible Z-Wave controller or hub, the sensor can be turned on or off remotely via the Z-Wave controller and network. When on, the sounder emits a very loud 105 dB alert tone and the integrated strobe flashes brightly.

The sounder/strobe is designed to be wall-mounted, and comes with a UL-approved AC plug-in power supply and offers an integrated battery backup, in case of AC power interruption.

• Sounder volume: 105 dB @ 1 Meter

• Strobe illumination: 4 white LED, 360 lumens

• For non-life safety applications

• 100’ line-of-sight range

• Anti-tamper design

• AC powered w/battery backup

• Anti-tamper design

• Up to 5 associations